Hybrid PV kit 24 kWp – DEYE SG01HP3 20 kW 3-phase HV on/off-grid inverter + Dyness Tower T21 21,3 kWh LiFePO4 energy storage + 37 × LONGi 645 W Bifacial

Hybrid photovoltaic kit 24 kWp – DEYE SG01HP3 20 kW 3‑phase HV on/off‑grid inverter + Dyness Tower T21 21.3 kWh LiFePO4 energy storage + 37 × LONGi 645 W Bifacial

The kit comprises 37 LONGi 645W Bifacial panels with a total capacity of 23.86 kWp, a DEYE SG01HP3 20 kW 3‑phase HV hybrid inverter (on/off‑grid), and a Dyness Tower T21 LiFePO4 battery with a capacity of 21.3 kWh. The configuration combines a high‑power PV array with energy storage, enabling energy storage and flexible use of power. The solution is intended for three‑phase installations in the home and small business segment.

Kit contents

• 37 × LONGi 645W Bifacial Silver photovoltaic panel (SKU: ME9113)
• 1 × DEYE 20kW SG01HP3 3-phase high-voltage hybrid inverter (SKU: ME1669)
• 1 × Dyness Tower T21 HV battery B9637 (SKU: ME8892)

Key parameters

• Kit type: PV + STORAGE + INVERTER
• Segment: HOME / SMALL BUSINESSES
• System voltage: HV
• Phase configuration: 3-phase
• Inverter power: 20 kW
• PV system capacity: 23,86 kWp
• Energy storage capacity: 21,3 kWh

Benefits of the configuration

• A total system capacity of 23.86 kWp from 37 LONGi 645W Bifacial panels provides significant PV generation potential.
• The DEYE SG01HP3 20 kW 3‑phase HV hybrid inverter offers on/off‑grid operation in line with its specification.
• The Dyness Tower T21 21.3 kWh LiFePO4 energy storage allows the energy produced by the system to be stored.
• LONGi bifacial panels utilise light incident on both sides of the module, improving energy yield under specific conditions.

Applications

The kit is aimed at homes and small businesses with a three‑phase HV installation that need to combine a PV system with energy storage. It is suitable where flexible energy use, storing surpluses, and the ability to operate on/off‑grid are important.

Scope of supply and system selection

The scope of supply includes only the components listed in the "Kit contents" section. Cabling, protection devices, the mounting structure and other accessories must be selected separately unless explicitly listed in the contents.